Message Boards

When I run odasrv, it automatically uses my internal ip address.
Typing "cvarlist" in the console shows: (among other things)
sv_upnp_externalip ""
Otherwise, the server runs fine.
So, how do I make my server accessible to people outside of my home network? The server appears on the master server list, but the ip address is internal.

Thanks,
   Robotron

try add this to config
set sv_usemasters 1
addmaster master1.odamex.net:15000
addmaster master2.odamex.net:15000

UPnP is not supported by all routers, some only have partial support.

What is the brand and model of your router?

According to this page of your router http://bc.whirlpool.net.au/bc/hardware/?action=h_view&model_id=232 :

...Cisco does not support UPnP on any of their routers..

My guess is that you'll have to use port forwarding on your router, not easy on cisco ios (unless your router has a web interface) so you may need to investigate this on a google search

1) Set up odasrv to listen on a specific port (preferably one greater than 1024) using the -port command line parameter
2) Configure your router to port forward to the machines ip address running odasrv, use the same port as what you did in step 1, the protocol is UDP

Hope this is a little helpful